MV 8895-LCD(Exynos8895,Samsung)
MV 8890-LCD(Exynos8890,Samsung)
MV 7420-LCD(Exynos7420,Samsung)
MV 5422-LCD(Exynos5422,Samsung)
MV 5260-LCD(Exynos5260,Samsung)
MV 5410-LCD(Exynos5410,Samsung)
MV 4412-LCD(Exynos4412,Samsung)
MV V310-LCD (S5PV310, Samsung)
MV V210-LCD (S5PV210, Samsung)
MV C110-LCD (S5PC110, Samsung)
MV C100-LCD (S5PC100, Samsung)
MV6410-LCD (S3C6410, Samsung)
MV2450-LCD (S3C2450, Samsung) : / / / /  
MV2443-LCD (S3C2443, Samsung)
MV3358-LCD (AM3358, TI)

  Product Description: MV V210-LCD (S5PV210, Samsung)
Materialize MiPi DSI/ CSI !

This solution board is based on Samsung S5PV210 (1GHz) Cortex-A8 32Bit RISC Processor.
It supports Built-in HD level image (2048Ⅹ2048) , Multi-Format Codec 1080p@30fps MPEG 2/4, H.264/H.263, VC-1, XviD. And OUT-put TV out , HDMI 1.3 for 1080p, 1080i, and it can support USB OTG 2.0, 3D Graphic A ccelerator . Also, it is possible to boot USB and SD Card. This board with SDRAM supported Bus Speed of 400MHz and L2 Cache 512KB memory support is full solution board which developers can have all specification test (Full Spec.) like high function Mobile Device, Industry Control/ System Control Device as it consumes lower power and more function than previous ARM board.

  1. Features of MV V210-LCD

Materialize MiPi DSI/ CSI !

1. Detachable main CPU Module for mass production
  ㆍParts posting and compact size for mass production
  ㆍMiniaturizing (60X60mm) CPU Module
  Support various extension functions with providing Extension connector
  ㆍ Possible to reuse the main CPU Module by modification of Base Board when to manufacture

※ Proposal : Various kinds of Products can be tested and manufactured for short time with the base board consist of the main CPU module and the chosen part by developers.

2. Camera Interactive Communication materialization( to be supported)
  ㆍH.264 / MPEG4 Encoding / Decoding support
  ㆍSource supply for DEMO player
  ㆍCodec Lib supply
  ㆍCommunication way: Ethernet

3. Google Android OS Porting

  ㆍAndroid Version 4.0.3, Kernel 3.0.8 
  ㆍSupport ADB based on Eclips development environment USB
  ㆍSupport Ethernet ADB (Android Debug Bridge) environment
  ㆍCamera, Video, MP3, Headset / Speaker, LCD, Touch, Button, Nand 
  ㆍSupport Ethernet, SD/MMC
  ㆍSupport Android Version 4.0.3, Kernel Ethernet

4. Equipped with S5PV210 (1GHz) based on Samsung Cortex A8 Core
  ㆍBuilt-in Multi Format Codec (MPEG4/MPEG2/H.264/H.263/VC1/XviD) in MCU
  ㆍHDMI Out-Put Socket 1.3 1080i (1920X1080 P/I) / TV OUT
  ㆍDVI/HD resolution (support 1024X768 up to 2048X2048 resolution)
  ㆍ2D/3D Accelerator

5. Equipped with High function, Low-Cost memory device for mass production
  ㆍUsed parts/Sockets and designed for mass production considered manufacture for mass
  ㆍEquipped with DDR (200MHz)
  ㆍEquipped with NAND Flash (256MB) which is lower coast and high capacity than previous
     NOR Flash

6. 7" Wide TFT-LCD for developing eBook/ luxury car navigation system
  ㆍEquipped with 7"LCD which is best-suited for electronic map, DMB and playing video
  ㆍEquipped with 7" Wide Type TFT-LCD /resolution 800X480

7. Equipped with Wi-Fi Module
  ㆍEquipped with Wi-Fi Module required for Wireless communication

8. Carrying G-sensor module
  ㆍSPI and I²C digital Interface
  ㆍUser selectable
  - ±2 g and ±8 g measurement ranges
  - Sample rate & frequency response 
  ㆍUltra low current consumption
  - ≤70 uA with 100/400 Hz sample rate
  - ≤11 uA with 40/10 Hz sample rate     

9. materialization of high speed USB 2.0 for optimized development environment
  ㆍmaterialization of USB 2.0 Device Interface based on maximum speed 480Mbps
  ㆍmaterialization of optimized development environment is possible with downloading mass
    storage Windows CE, Linux, Android BSP image rapidly
  ㆍUSB Host 2.0
  ㆍUSB OTG 2.0

10. Support various Boot Mode
    ㆍiROM Boot Mode
    ㆍUSB Boot Mode
    ㆍNAND Boot Mode

11. Equipped with battery only for mobile device for manufacturing mobile device and Materialization of rechargeable circuit
    ㆍEquipped with Not the adapter type for simple reference board and training kit, but the mobile
      device-only battery and extra battery for manufacturing mobile device
    ㆍmaterialization of battery charge circuit and software which is possible to application on
      mass production mobile device

12. Various Interface giveaway
    ㆍSPI, I2C ,I2S, UART 3Ports, Key 4EA, extra header giveaway
    ㆍMIPI - CSI(Camera), MIPI - DSI(LCD)

 2. Components of MV V210-LCD System Block Diagram

 3. MV V210-LCD Main CPU Module


 3-1. Components of MV V210-LCD System

 4. Components of MV V210-LCD and Peripheral Device

ㆍUSB HOST 2.0 / USB OTG 2.0 Device (Maximum 480 Mbps)
ㆍDDR2(512MB) / NAND Flash(256MB)
2D/3D Graphics, DVFS, AXI 64-Bit Bus
ㆍWindows CE 6.0 / Linux 2.6.32 / Android 4.0.3
<Peripheral Device>    

ㆍGaon GGM-150E
ㆍBuilt-in ARM7TDMI
ㆍBuilt-in 4Mbit Flash
ㆍApplicable area: Navigation

Dual Camera
(for Interactive
ㆍAptina CMOS Image Sensor
ㆍ2M Pixel
ㆍReal-Time JPEG Encoder
ㆍApplicable area: Phone, PDA


ㆍ802.11g USB Module
ㆍSupport WPA/WPA2
ㆍApplicable area: Wireless communication

ㆍBattery only for mobile device
ㆍVerious mAH capacity
ㆍApplicable area: Whole mobile part


(support only android 2.3/4.0.3)
ㆍ5M Pixel
ㆍAptina CMOS Image Sensor
ㆍ Applicable area : Phone, PDA
  ( Option )

(support only android 2.3/4.0.3)
ㆍ802.11 b/g/n SDIO Module
 ( Option )

 5. MV V210-LCD Hardware SPEC
CPU S5PV210 Cortex A8 Core, 1GHz
RAM Samsung DDR2
M1 Port : 256 Mbyte (2EA)
M2 Port : 256 Mbyte (2EA)
NAND Flash Samsung NAND Large Block 2GB(256MByte)
Audio Codec I2S WM8580 (I2S 5.1CH, low power MP3 Play Mode) Stereo 400m W out-put speaker, MIC-IN Headset
Graphic 2D/3D support 2D/3D Graphic Controller
USB 2Ports USB Host 2.0 , USB OTG 2.0
MIPI 2Ports MIPI-CSI(Camera) 1Port, MIPI-DSI(LCD)
1Port / Header
Video(TV-Out) 1Port NTSC/PAL Composite
HDMI 1Port 1.3 HDMI Standard 19Pin Connector ( 1080P, resolution)
LCD 7" LCD 7" WVGA LCD / 800X480 (Dual Port Connector)
GPS Gaon GPS SiRF Star III, GPS Engine Module
Camera 2 Port Supprot Auto Focus, Preview & Snap Shot function,
Aptina 2M Pi/Ei (2 Port CF Interface Header )
Ethernet SMSC9220 UTP 3.4.5 in 10 Base-T and UTP 5 in 100 Base-Tx
SD Slot 2Port SD Host & SD Memory V2.0 Compliant
SPDIF PCM 24-bit
per sample
Non-Linear PCM Format (AC3, MPEG1 and MPEG2)
CF interface 1Port Header
Wi-Fi(Option) USB Type Wi-Fi 802.11g, Support WPA/WPA2 , Provide USB Interface
Battery (Option) 1530mAH @3.7V More than Full Operation 1 Hour, Provide Battery Interface
Charger BQ24032 AC & Battery Switching function, Battery Connector
Others Ports SPI, I2C, UART 3Ports, EBI, JTAG, Key 2EA, LED 5EA
PMIC MAX8698C 3Step-Down Converters, 9LDO
DVI SIL9134 1024×768
SPI Flash AT25DF321  

 6. MV V210-LCD Software SPEC
OS Windows CE 6.0, Embedded Linux 2.6.32, Android 4.0.3
Bootloader H/W initialization (UART) (115200)
Image Download USB 2.0 (Client) / SMSC9220 10/100Base/iROM
Flash NAND Flash File System

TFT LCD 7"/Touch
USB 2.0 Host / USB 2.0 OTG
USB HUB USB Storage / Mouse / 5 Keyboard
USB Client 2.0 ActiveSync(Version 4.x)
  - Debug UART
  - GPS
  - MIPI
  - DVI (1024B X 768)
  - HDMI (480i / 720p)
  - TV - OUT (720X480, NTSC)
  - Audio Codec (SPK / MIC / Headset)
  - I2C / SPI / Serial G-Sensor
  - WiFi (USB Type)
  - SDHC2.0 memory card
CMOS Dual Camera
Ethernet Device Driver SMSC9220
LCD BRT LCD adjust the brightness (PWM)
Support PMU

Application Camera APP sample giveaway

 7. Contents of MV V210-LCD CD

1. Schematic(PDF, DSN), Data Sheet of Components
2. User manual(Windows CE, Linux, Android), Korean Manual
3. Provide Device Driver source
4. BSP(Windows CE, Linux, Android) source, Provide Binary Images as following
  ㆍWindows CE 6.0 BSP Binary Image
  ㆍWindows CE 6.0 BSP Source file
  ㆍSupport Dual Camera based on Windows CE 6.0
  ㆍSupport Windows CE 6.0 BSP TFT LCD 7" Driver
  ㆍSupport Windows CE 6.0 BSP TFT LCD 7" Touch Driver
  ㆍSupport Audio Codec(SPK,MIC,Headset) based on Windows CE 6.0
  ㆍSupport I2C / SPI / Serial G-Sensor Driver based on Windows CE 6.0
  ㆍSupport Wi-Fi(USB Dongle Type), SDHC2.0 based on Windows CE 6.0
  ㆍApplication(Media Player) based on Windows CE 6.0
  Support Interactive communication Camera Player source based on Windows
   CE 6.0 (to be supported)

  ㆍVarious device driver source based on Windows CE 6.0
  ㆍBoot Loader Binary Image for Embedded Linux
  ㆍBoot Loader Source file for Embedded Linux
  ㆍEmbedded Linux Kernel 2.6.32 Version Binary Image
  ㆍEmbedded Linux Kernel 2.6.32 Version Source file
  ㆍFile System Binary Image for Embedded Linux
  ㆍFile System file for Embedded Linux
  ㆍSupport TFT LCD 7" Driver for Embedded Linux
  ㆍSupport TFT LCD 7" Touch Driver for Embedded Linux
  ㆍSupport Camera for Embedded Linux
  ㆍSupport USB Wi-Fi for Embedded Linux
  ㆍSupport Sample Code of MFC H.264 Codec for Embedded Linux
  ㆍSupport Audio Codec(SPK,MIC,Headset) for Embedded Linux
  ㆍ Various device driver source based on Embedded Linux 2.6.32
  ㆍ Use of various USB OTG Host based on Embedded Linux 2.6.32
  ㆍ Board supporting video device : Support Composite, DVI, HDMI, NTSC/PAL
  ㆍ Android Linux O/S porting: Support LCD, Touch
  ㆍ Android Version 4.0.3, Kernel 3.0.8 O/S porting
  ㆍ Support Ethernet based on Android Version 4.0.3, Kernel 3.0.8
  ㆍ Support Camera based on Android Version 4.0.3, Kernel 3.0.8
  ㆍ Support video based on Android Version 4.0.3, Kernel 3.0.8
  ㆍ Support DVI based on Android Version 4.0.3, Kernel 3.0.8
  ㆍ Support SD/MMC, NAND based on Android Version 4.0.3, Kernel 3.0.8
  ㆍ Support TFT LCD 7" Driver based on Android Version 4.0.3, Kernel 3.0.8
  ㆍ Support TFT LCD 7" Touch Driver based on Android Version 4.0.3, Kernel 3.0.8
  ㆍ Support Audio Codec(SPK,MIC,Headset) based on Android Version 4.0.3, Kernel 3.0.8
  Add Graphic rotation function based on Android Version 4.0.3, Kernel 3.0.8
  Add GPS Android based on Android Version 4.0.3, Kernel 3.0.8

 8. Package List(MV V210-LCD)
Power Supply
USB Cable
Serial Cable
GPS Receiver
Camera Module

 9. Various applied area of MV V210-LCD

 10. Development Tool Environment

 11. Technical Support

Technical Q&A for MV V210-LCD

ㆍ Technical support team for Reference Board (6 experts) !!

ㆍ Quick & accurate After sales Service !

ㆍ Technical support by E-mail for Solution board problem

  (E-mail : tech@mvtool.co.kr / tst@microvision.co.kr )